Microscan MINI Hawk Xi Manual de usuario descargar pdf (Pagina 169)

MINI Hawk Xi High Performance Imager Us

er Manual 7-15

I/O Parameters

Serial Verification

Allows the user to verify configuration command status.

Serial Command Echo Status

Serial Command Beep Status

Usage:

This command is useful in removing any doubt about the imager’s interpretation

of any configuration command.

For example, if the current preamble is “SOM” and <K701,1,START> is

entered, the imager will echo back <K701,SOM> since the attempted

entry “START” exceeds the four character limit for that command.

Therefore, it is rejected and the existing “SOM” message is echoed back

and remains the preamble message.

Definition:

When enabled, a configuration command

received from the host is echoed back to the

host with the resultant settings.

Function: If a command with multiple fields is processed, some of the fields may

have been processed properly while others were not. The changes will

appear in the string echoed back so that the user will know which fields

did or did not change.

Serial Cmd: <K701,serial command echo status,serial command beep status,

control/hex output>

Default: Disabled

Options: 0 = Disabled 1 = Enabled

Usage: Used to audibly verify the acceptance and validity of a command.

Definition: Causes the imager to beep once whenever a K command is entered to

indicate that the command was accepted and processed.

Function: If an invalid command is entered, the imager beeps 5 times to indicate an

invalid entry. However, this does not necessarily mean that all data fields

have been entered incorrectly. Only one bad field needs to be found in

order to activate the 5 beep response.

Serial Cmd: <K701,serial command echo status,serial command beep status,

control/hex output>

Default: Disabled

Options: 0 = Disabled 1 = Enabled

Imager

Host

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 387 388

Sin comentarios

Microscan MINI Hawk Xi Manual de usuario Pagina 169