Microscan MINI Hawk Xi Manual de usuario descargar pdf (Pagina 248)

10-18

MINI Hawk Xi High Performance Imager User Manual

Camera Settings

are typically obtained during the calibration process, and do not necessarily

need to be modified directly by the user.

Optics

The MINI Hawk Xi has three different optical configurations available: Standard Density,

High Density, and Ultra High Density. Determine the optics of your imager and find the

corresponding camera values in the following sections.

Standard Density, High Density, and Ultra High Density Optics

Shutter Speed

Gain

Usage: Faster shutter speeds reduce blurring in faster applications.

Slower shutter speeds are useful in slower applications and lower contrast

applications.

Definition:

This value sets the exposure or integration time for the image sensor pixels.

The shutter speed setting in relation to the speed of the object is critical. If a

slow shutter speed is selected to capture fast-moving objects, blurring or

smearing of the image will occur. As shutter speed is increased, more light

and gain become necessary, because the pixels’ exposure time has

decreased.

Serial Cmd: <K541,shutter speed,gain>

Default: 250 (SD) 30 (HD) 300 (UHD)

Options: 15 to 12,500

Usage: Can be used to adjust the brightness of the image.

Definition: Sets the gain value for the image sensor. This setting can be configured

through calibration, which is the recommended method. A higher gain

value will increase the brightness of the image, but the visual noise

reduction performance of the system is reduced. Before configuring gain

settings, the desired shutter speed should already be set and the gain

should be configured to optimize the shutter speed setting.

Serial Cmd: <K541,shutter speed,gain>

Default: 20

Options: 0 to 33

1 2 ... 243 244 245 246 247 248 249 250 251 252 253 ... 387 388

Sin comentarios

Microscan MINI Hawk Xi Manual de usuario Pagina 248