Microscan MS-Q Imager Manual de usuario descargar pdf (Pagina 65)

Batch/Battery

Save changes whenever you reconfigure Imager settings.

Save

Settings

Clear

all Data

Default

to USB

Clear XML

Rules

Default

to PS2

Batch Mode Options

The MS-Q unit features a Batch Mode for applications requiring a portable Imager.

Batch Mode allows a user to store scanned data to the Imager’s non-volatile memory

and later transfer that data to a host computer when connected, either by USB and

RS-232 cable or by Bluetooth.

The MS-Q dedicated batch memory is a minimum of 1MB.

The MS-Q will automatically detect when the Bluetooth® radio is out of range, a USB or

PS2 cable is detached, or an RS-232 cable is detached (provided it is plugged into a

power supply). If a battery is installed, the MS-Q will switch to Batch Mode and buffer

the data in non-volatile memory.

Send & Log

If you read the Send & Log Mode symbol to the left, whenever you con-

nect, all data in the buffer will be downloaded to the host but retained in

the Imager’s memory. The data can be transferred again by scanning

Transfer All Data in Memory.

When the memory LED turns RED, you must download or data will be lost.

Send & Buffer (Default)

If you read the Send & Buffer Mode symbol to the right, whenever you

connect, all data in the buffer will be downloaded to the host and ERASED

in the MS-Q.

You must have a data collection program open before connecting in

this mode or all buffered data will be lost.

Log Only

In Log Only Mode, the Imager will only store data into non-volatile mem-

ory. You can only send the data by scanning Transfer All Data in Memory

(see explanation next page). Once the memory has been transferred to a

host, all of the data will still reside in memory. A user must read the Delete

Scanned Data from Memory symbol to clear memory.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 203 204

Sin comentarios

Microscan MS-Q Imager Manual de usuario Pagina 65