Microscan MS-4X Manual de usuario descargar pdf (Pagina 186)

Serial Verification

12-8 MS-880 Industrial Long Range Scanner User’s Manual

12–Outputs

Serial Verification

Allows the user to verify configuration command status.

Serial Command Echo Status

Serial Command Beep Status

Definition: When enabled, a configuration command received from the host is ech-

oed back to the host with the resultant settings.

Function: If a command with multiple fields is processed, some of the fields may

have been processed properly while others were not. The changes will

appear in the string echoed back so that the user will know which fields

did or did not change.

Usage: This command is useful in removing any doubt about the scanner’s

interpretation of any configuration command.

For example, if the current preamble is “SOM” and <Kd1, START> is

entered, the scanner will echo back <Kd1, SOM> since the attempted

entry “START” exceeds the four character limit for that command.

Therefore it is rejected and the existing “SOM” message is echoed back

and remains the preamble message.

Serial Cmd: <K701,serial command echo status,serial command beep sta-

tus,control/hex output>

Default: Disabled

Options: 0 = Disabled 1 = Enabled

Definition: Causes the scanner to beep once whenever a K command is entered to

indicate that the command was accepted and processed.

Function: If an invalid command is entered, the scanner beeps 5 times to indicate

an invalid entry. However, this does not necessarily mean that all data

fields have been entered incorrectly. Only one bad field needs to be

found in order to activate the 5 beep response.

Usage: Used to audibly verify the acceptance and validity of a command.

Serial Cmd: <K701,serial command echo status,serial command beep sta-

tus,control/hex output>

Default: Disabled

Options: 0 = Disabled 1 = Enabled

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 311 312

Sin comentarios

Microscan MS-4X Manual de usuario Pagina 186